-
Single Electrode Holder
It can hold one electrode, and can be attached in different ways inside the aquarium or sump.

-
Electrode/Sensor holder
It can hold up to four electrodes, and can be attached in different ways inside the aquarium or sump.

-
pH Computer Set
Provides high precision measurement and control. It is used to control precise values of pH in the aquarium or the Calciumreactor. A plastic shafted pH electrode with BNC fitting and the correct calibration fluids are included.

-
mV Computer Set
Ideal for controlling anaerobic biological filters such as the Nitratereductor which have negative redox potential, control the supply of ozone to the aquarium, or monitor the aquarium water’s redox potential.

-
pH Controller
This is a precision instrument for controlling the pH value in aquaria. The use of an original Aqua Medic electrode #220.10 is recommended. Please order separately.

-
mV Controller
The unit has a broad controlling range from -500 to a +500 mV, and a measuring range from -1000 to +1000 mV. The use of an original Aqua Medic electrode #220.16 is recommended.

-
LF Controller
The salt content of water can be determined by measuring the electrical conductivity. The unit is supplied with a directly connected, saltwater resistant graphite electrode.

-
aquaniveau – 1 switch
This electronic level controller may be used in 2 different modes: As a top-off controller with one or two float switches, as well as a maximum/minimum contact to control reverse osmosis units, in conjunction with a solenoid valve.

-
aquaniveau – 2 switches
This electronic level controller may be used in 2 different modes: As a top-off controller with one or two float switches, as well as a maximum/minimum contact to control reverse osmosis units, in conjunction with a solenoid valve.

-
T Controller HC
This unit is for the control of heating systems. The control range varies from 0 to 50

-
T Controller CC
This unit is for the control of cooling units. The control range varies from 0 to 50

-
mV Electrode – low pressure
Aqua Medic mV Electrodes (Redox-potential) are quality products designed for both accurate measurement and long, trouble free use. mV Electrodes are available in two versions: standard electrodes with plastic shaft, and high pressure electrodes with PG 13.5 thread.

-
mV Electrode – high pressure, PG 13.5, regular
Aqua Medic mV Electrodes (Redox-potential) are quality products designed for both accurate measurement and long, trouble free use. mV Electrodes are available in two versions: standard electrodes with plastic shaft, and high pressure electrodes with PG 13.5 thread.

-
mV Electrode – high pressure, PG 13.5, short
Aqua Medic mV Electrodes (Redox-potential) are quality products designed for both accurate measurement and long, trouble free use. mV Electrodes are available in two versions: standard electrodes with plastic shaft, and high pressure electrodes with PG 13.5 thread.

-
pH Electrode – low pressure
Aqua Medic pH Electrodes are quality products designed for both accurate measurement and long, trouble free use. pH Electrodes are available in two versions: standard electrodes with plastic shaft and high pressure electrode with PG 13.5 thread.

-
pH Electrode – high pressure, PG 13.5, regular
Aqua Medic pH Electrodes are quality products designed for both accurate measurement and long, trouble free use. pH Electrodes are available in two versions: standard electrodes with plastic shaft and high pressure electrode with PG 13.5 thread.

-
pH Electrode – high pressure, PG 13.5, short
Aqua Medic pH Electrodes are quality products designed for both accurate measurement and long, trouble free use. pH Electrodes are available in two versions: standard electrodes with plastic shaft and high pressure electrode with PG 13.5 thread.

- Home
- Products
- shopAquaMedic
- Refurbished & Discontinued
- Replacement Parts
- Saltwater
- Freshwater
- Product Catalog
- AquariumWaterTesting.com
- Partner Locator
- Blog
- About
- Contact


